Pressure gauge UAM MP2-U2
Pressure gauge MP2-U2 is designed to measure overpressure of
non-crystallising liquids, steam, gas, oxygen, acetylene, refrigerants.
The measured environment must be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel devices is used – groups: ammonia, corrosion-resistant.
The MP2-U2 pressure gauge is made of the following materials as standard: steel body, organic glass, brass alloy mechanism and fitting.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.
Description
Case material: steel
Measuring element material: copper alloy
Glass: organic
|
|
Diameter size, mm | Accuracy class | Measuring range | Degree of protection (IP) | Thread |
Connection |
|
MP2-U2 |
50
63 |
2,5 | From 0 to 0,06; 0,1; 0,16; 0,25; 0,4; 0,6; 1,0; 1,6; 2,5; 4; 6; 10; 16; 25; 40; 60 MPa | ІР40 | М12х1,5
G1/4 |
Bottom, Back |
On request, units of measurement can be ordered in kgs/cm²; bar, atm
Pressure gauges can be supplied with a flange
The gauges can operate at temperature -50°C to + 60°C
Versions for propane, oxygen and acetylene
|
Diameter size, mm |
Accuracy class | substance | Measuring range | Degree of protection (IP) | Thread |
Connection |
|
| MP2-U2 | 50
63 |
2,5 |
Propane C3H8 |
0,6 MPa | ІР40 | М12х1,5
G1/4 |
Bottom,
Back |
|
Oxygen О2 |
2,5; 25 MPa |
||||||
| Acetylene
C2H2 |
0,4; 4 MPa |
Additional information
| Weight | N/A |
|---|---|
| Degree of protection | IP40 |
| Case material | Steel |
| Connection | Back (Axial), Bottom (Radial) |
| Thread | G1/4, М12х1,5 |
| Measuring range, MPa | from 0 to 0.06, from 0 to 0.16, from 0 to 0.25, from 0 to 0.4, from 0 to 0.6, from 0 to 1.0, from 0 to 1.6, from 0 to 10, from 0 to 100, from 0 to 16, from 0 to 2.5, from 0 to 25, from 0 to 4, from 0 to 40, from 0 to 6, from 0 to 60 |
| Diameter, mm | 50, 63 |
