Vacuum gauge UAM DV2005-U2
Pressure gauge DV2005-U2 is designed to measure the overpressure of non-crystallising liquids, steam, gas that are not aggressive to the materials of parts in contact with the measured medium and to provide an alarm (closing/opening of electrical circuits) when the set pressure limit is reached.
The measured environment must be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel devices is used – groups: ammonia, corrosion-resistant.
Pressure gauge DV2005-U2 is made of the following materials as standard: steel case, organic glass, brass alloy mechanism and fitting.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.
Download technical description ДВ2005-У2
Pressure gauge DV 2005-U2 is a complete analogue of pressure gauges of the following manufacturers:
- ДВ 2005ф “Фізтех”
- ДВ 2005 Сг “Манотом”
Description
Case material: steel, stainless steel*
Measuring element material: copper alloy
Glass: organic
Current strength: no more than 1A
Voltage: 220-380V
Power: no more than 30W
Connection of external circuits
III- two opening contacts
IV- two closing contacts
V- two contacts: first is opening, second is closing
VI- two contacts: first is closing, second is opening
|
|
Diameter size, mm | Accuracy class | Measuring range, MPa | Degree of protection (IP) | Thread |
Connection |
|
DV2005-U2 |
160 |
1,5 1,0*
|
From -0,1 to 0 MPa | ІР40
IP53* IP54* |
М20х1,5 |
Bottom Back* |
*Special version
On request, units of measurement can be ordered in kgs/cm²; bar, atm
The gauges can operate at temperature -50°C to + 60°C
Additional information
| Connection | Back (Axial), Bottom (Radial) |
|---|---|
| Diameter, mm | 160 |
| Case material | Steel |
| Measuring range, MPa | from -0.1 to 0 |
| Thread | M20x1,5 |
| Degree of protection | IP40 |
