Manovacuum gauge UAM DA2005-U2

1,517.76 1,734.88 

Pressure gauge DA2005-U2 is designed to measure the overpressure of non-crystallising liquids, steam, gas that are not aggressive to the materials of parts in contact with the measured medium and to provide an alarm (closing/opening of electrical circuits) when the set pressure limit is reached.
The measured environment must be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel devices is used – groups: ammonia, corrosion-resistant.
Pressure gauge DA2005-U2 is made of the following materials as standard: steel case, organic glass, brass alloy mechanism and fitting.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.

Download technical description of pressure gauge ДА2005-У2

Description

Case material: steel, stainless steel*

Measuring element material: copper alloy

Glass: organic

Current strength: no more than 1A

Voltage: 220-380V

Power: no more than 30W

 

Connection of external circuits

III- two opening contacts

IV- two closing contacts

V- two contacts: first is opening, second is closing
VI- two contacts: first is closing, second is opening

Diameter size, mm Accuracy class Measuring range, MPa Degree of protection (IP) Thread

Connection

DA2005-U2

160  

1,5

  1,0*

 

From -0,1 to 0,06; 0,15; 0,3; 0,9; 1,5; 2,4 MPa ІР40

IP53*

IP54*

М20х1,5

Bottom

   Back*

*Special version

 On request, units of measurement can be ordered in kgs/cm²; bar, atm  

 The gauges can operate at temperature -50°C to + 60°C

Additional information

Розташування штуцеру

ОШ, РШ

Діаметр корпусу, мм

160

Матеріал корпусу

Сталь

Різьба штуцеру

M20x1,5

Ступінь захисту

IP40

Max. межі тиску, МПа

від -0.1 до 0.06, від -0.1 до 0.15, від -0.1 до 0.3, від -0.1 до 0.5, від -0.1 до 0.9, від -0.1 до 1,5, від -0.1 до 2.4

Connection

Back (Axial), Bottom (Radial)

Diameter, mm

160

Case material

Steel

Thread

M20x1,5

Degree of protection

IP40

Measuring range, MPa

from -0.1 to 0.06, from -0.1 to 0.15, from -0.1 to 0.3, from -0.1 to 0.5, from -0.1 to 0.9, from -0.1 to 1.5, from -0.1 to 2.4

You may also like…