Manovacuum gauge UAM DA2010-U2
0.00 ₴ – 1,360.00 ₴
Pressure gauge DA2010-U2 is designed to measure the overpressure of non-crystallising liquids, steam, gas that are not aggressive to the materials of parts in contact with the measured medium and to provide an alarm (closing/opening of electrical circuits) when the set pressure limit is reached.
The measured environment must be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel devices is used – groups: ammonia, corrosion-resistant.
Pressure gauge DA2010-U2 is made of the following materials as standard: steel case, organic glass, brass alloy mechanism and fitting.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.
Case material: steel, stainless steel*
Measuring element material: copper alloy
Current strength: no more than 1A
Power: no more than 30W
Connection of external circuits
III- two opening contacts
IV- two closing contacts
V- two contacts: first is opening, second is closing
VI- two contacts: first is closing, second is opening
|Diameter size, mm||Accuracy class||Measuring range, MPa||Degree of protection (IP)||Thread||
|From -0,1 to 0,06; 0,15; 0,3; 0,9; 1,5; 2,4 MPa||ІР40
On request, units of measurement can be ordered in kgs/cm²; bar, atm
The gauges can operate at temperature -50°C to + 60°C
Back (Axial), Bottom (Radial)
|Degree of protection||
|Measuring range, MPa||
from -0.1 to 0.06, from -0.1 to 0.15, from -0.1 to 0.3, from -0.1 to 0.5, from -0.1 to 0.9, from -0.1 to 1.5, from -0.1 to 2.4