Pressure gauge UAM MTI-U2

4,081.09 ₴ – 4,402.56 ₴

Ask the manager for the cost

Pressure gauge MTI-U2 is designed to measure overpressure, non-crystallising liquids, steam, gas, oxygen, acetylene, refrigerants.
The measured environment should be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel instruments is used – groups: ammonia; corrosion-resistant.
The MTI-U2 pressure gauge is made of the following materials in the standard version: steel body, technical glass, mechanism and fitting – brass alloy.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.

Connection

Diameter, mm

Case material

Thread

Degree of protection

Measuring range, MPa

Accuracy class

Clear

Description

Case material: aluminium alloy.

Measuring element material: stainless steel,bronze, brass.

Glass: technical.

Diameter size, mm

Accuracy class

Measuring range, MPa

Degree of protection (IP)

Thread

Connection

MTI-U2

160

0,4

0,6

1,0

From 0 tо 0,06; 0,1; 0,16; 0,25; 0,4; 0,6; 1,0; 1,6; 2,5; 4; 6; 10; 16; 25; 40; 60;100;160 MPа

IP40

IP54

IP65

М20х1,5

Bottom

* Special version

On request, units of measurement can be ordered in kgs/cm²; bar, atm

The gauges can operate at temperature -50°C to + 60°C for accuracy class 0.6; 1.0

-30+50 °С for accuracy class 0.4

Maximum temperature of the measuring environment up to 150°C

Additional information

Connection	Bottom (Radial)
Diameter, mm	160
Case material	Aluminium alloy
Thread	M20x1,5
Degree of protection	IP40
Measuring range, MPa	from 0 to 0.06, from 0 to 0.1, from 0 to 0.16, from 0 to 0.25, from 0 to 0.4, from 0 to 0.6, from 0 to 1.0, from 0 to 1.6, from 0 to 10, from 0 to 100, from 0 to 16, from 0 to 160, from 0 to 2.5, from 0 to 25, from 0 to 4, from 0 to 40, from 0 to 6, from 0 to 60
Accuracy class	0,4, 0,6, 1