Electric contact pressure gauges Archives - Pressure gauges UAM https://manometers.com.ua/en/product-category/electric-contact-pressure-gauges/ Ukrainian pressure gauges producer Thu, 09 May 2024 09:43:33 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://manometers.com.ua/wp-content/uploads/2025/03/cropped-logo-uam-favicon-tr-512x512-1-32x32.png Electric contact pressure gauges Archives - Pressure gauges UAM https://manometers.com.ua/en/product-category/electric-contact-pressure-gauges/ 32 32 Pressure gauge UAM DM2010-U2 https://manometers.com.ua/en/produkciya/pressure-gauge-uam-dm2010-u2/ Mon, 24 Jul 2023 03:17:55 +0000 https://manometers.com.ua/?post_type=product&p=18807 Pressure gauge DM2010-U2 is designed to measure the overpressure of non-crystallising liquids, steam, gas that are not aggressive to the materials of parts in contact with the measured medium and to provide an alarm (closing/opening of electrical circuits) when the set pressure limit is reached.
The measured environment must be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel devices is used - groups: ammonia, corrosion-resistant.
Pressure gauge DM2010-U2 is made of the following materials as standard: steel case, organic glass, brass alloy mechanism and fitting.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.

Download technical description of pressure gauge ДМ2010-У2

Запись Pressure gauge UAM DM2010-U2 впервые появилась Pressure gauges UAM.

]]> Case material: steel, stainless steel*

Measuring element material: copper alloy

Glass: organic

Current strength: no more than 1A

Voltage: 220-380V

Power: no more than 30W

 

Connection of external circuits

III- two opening contacts

IV- two closing contacts

V- two contacts: first is opening, second is closing

VI- two contacts: first is closing, second is opening

 Diameter size, mm Accuracy class Measuring range, MPa Degree of protection (IP) Thread

Connection

DM2010-U2

 63*

100

  

1,5

  1,0*

 

 From 0 to 0,06; 0,1; 0,16; 0,25; 0,4; 0,6; 1,0; 1,6; 2,5; 4; 6; 10; 16; 25; 40; 60;

100* 160* MPa

 ІР40

IP53*

IP54*

 М20х1,5

Bottom

   Back*

*Special version

 On request, units of measurement can be ordered in kgs/cm²; bar, atm  

 The gauges can operate at temperature -50°C to + 60°C

Запись Pressure gauge UAM DM2010-U2 впервые появилась Pressure gauges UAM.

]]> Manovacuum gauge UAM DA2010-U2 https://manometers.com.ua/en/produkciya/manovacuum-gauge-uam-da2010-u2/ Mon, 24 Jul 2023 03:16:57 +0000 https://manometers.com.ua/?post_type=product&p=18880 Pressure gauge DA2010-U2 is designed to measure the overpressure of non-crystallising liquids, steam, gas that are not aggressive to the materials of parts in contact with the measured medium and to provide an alarm (closing/opening of electrical circuits) when the set pressure limit is reached.
The measured environment must be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel devices is used - groups: ammonia, corrosion-resistant.
Pressure gauge DA2010-U2 is made of the following materials as standard: steel case, organic glass, brass alloy mechanism and fitting.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.

Download technical description of pressure gauge DA2010-U2

Запись Manovacuum gauge UAM DA2010-U2 впервые появилась Pressure gauges UAM.

]]> Case material: steel, stainless steel*

Measuring element material: copper alloy

Glass: organic

Current strength: no more than 1A

Voltage: 220-380V

Power: no more than 30W

 

Connection of external circuits

III- two opening contacts

IV- two closing contacts

V- two contacts: first is opening, second is closing
VI- two contacts: first is closing, second is opening

 Diameter size, mm Accuracy class Measuring range, MPa Degree of protection (IP) Thread

Connection

DA2010-U2

 63*

100

  

1,5

  1,0*

 

 From -0,1 to 0,06; 0,15; 0,3; 0,9; 1,5; 2,4 MPa ІР40

IP53*

IP54*

 М20х1,5

Bottom

   Back*

*Special version

 On request, units of measurement can be ordered in kgs/cm²; bar, atm  

 The gauges can operate at temperature -50°C to + 60°C

Запись Manovacuum gauge UAM DA2010-U2 впервые появилась Pressure gauges UAM.

]]> Vacuum gauge UAM DV2010-U2 https://manometers.com.ua/en/produkciya/vacuum-gauge-uam-dv2010-u2/ Mon, 24 Jul 2023 03:15:10 +0000 https://manometers.com.ua/?post_type=product&p=18909 Pressure gauge DV2010-U2 is designed to measure the overpressure of non-crystallising liquids, steam, gas that are not aggressive to the materials of parts in contact with the measured medium and to provide an alarm (closing/opening of electrical circuits) when the set pressure limit is reached.
The measured environment must be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel devices is used - groups: ammonia, corrosion-resistant.
Pressure gauge DV2010-U2 is made of the following materials as standard: steel case, organic glass, brass alloy mechanism and fitting.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.

Запись Vacuum gauge UAM DV2010-U2 впервые появилась Pressure gauges UAM.

]]> Case material: steel, stainless steel*

Measuring element material: copper alloy

Glass: organic

Current strength: no more than 1A

Voltage: 220-380V

Power: no more than 30W

 

Connection of external circuits

III- two opening contacts

IV- two closing contacts

V- two contacts: first is opening, second is closing
VI- two contacts: first is closing, second is opening

 Diameter size, mm Accuracy class Measuring range, MPa Degree of protection (IP) Thread

Connection

DV2010-U2

 63*

100

  

1,5

  1,0*

 

 From -0.1 to 0 MPa ІР40

IP53*

IP54*

 М20х1,5

Bottom

   Back*

*Special version

 On request, units of measurement can be ordered in kgs/cm²; bar, atm  

 The gauges can operate at temperature -50°C to + 60°C

Запись Vacuum gauge UAM DV2010-U2 впервые появилась Pressure gauges UAM.

]]> Pressure gauge UAM DM2005-U2 https://manometers.com.ua/en/produkciya/pressure-gauge-uam-dm2005-u2/ Mon, 24 Jul 2023 03:14:26 +0000 https://manometers.com.ua/?post_type=product&p=18914 Pressure gauge DM2005-U2 is designed to measure the overpressure of non-crystallising liquids, steam, gas that are not aggressive to the materials of parts in contact with the measured medium and to provide an alarm (closing/opening of electrical circuits) when the set pressure limit is reached.
The measured environment must be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel devices is used - groups: ammonia, corrosion-resistant.
Pressure gauge DM2005-U2 is made of the following materials as standard: steel case, organic glass, brass alloy mechanism and fitting.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.

Запись Pressure gauge UAM DM2005-U2 впервые появилась Pressure gauges UAM.

]]> Case material: steel, stainless steel*

Measuring element material: copper alloy

Glass: organic

Current strength: no more than 1A

Voltage: 220-380V

Power: no more than 30W

 

Connection of external circuits

III- two opening contacts

IV- two closing contacts

V- two contacts: first is opening, second is closing
VI- two contacts: first is closing, second is opening

 Diameter size, mm Accuracy class Measuring range, MPa Degree of protection (IP) Thread

Connection

DM2010-U2

 160  

1,5

  1,0*

 

 From 0 to 0,06; 0,1; 0,16; 0,25; 0,4; 0,6; 1,0; 1,6; 2,5; 4; 6; 10; 16; 25; 40; 60;

100* 160* MPa

 ІР40

IP53*

IP54*

 М20х1,5

Bottom

   Back*

*Special version

 On request, units of measurement can be ordered in kgs/cm²; bar, atm  

 The gauges can operate at temperature -50°C to + 60°C

Запись Pressure gauge UAM DM2005-U2 впервые появилась Pressure gauges UAM.

]]> Manovacuum gauge UAM DA2005-U2 https://manometers.com.ua/en/produkciya/manovacuum-gauge-uam-da2005-u2/ Mon, 24 Jul 2023 03:13:54 +0000 https://manometers.com.ua/?post_type=product&p=18951 Pressure gauge DA2005-U2 is designed to measure the overpressure of non-crystallising liquids, steam, gas that are not aggressive to the materials of parts in contact with the measured medium and to provide an alarm (closing/opening of electrical circuits) when the set pressure limit is reached.
The measured environment must be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel devices is used - groups: ammonia, corrosion-resistant.
Pressure gauge DA2005-U2 is made of the following materials as standard: steel case, organic glass, brass alloy mechanism and fitting.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.

Download technical description of pressure gauge ДА2005-У2

Запись Manovacuum gauge UAM DA2005-U2 впервые появилась Pressure gauges UAM.

]]> Case material: steel, stainless steel*

Measuring element material: copper alloy

Glass: organic

Current strength: no more than 1A

Voltage: 220-380V

Power: no more than 30W

 

Connection of external circuits

III- two opening contacts

IV- two closing contacts

V- two contacts: first is opening, second is closing
VI- two contacts: first is closing, second is opening

 Diameter size, mm Accuracy class Measuring range, MPa Degree of protection (IP) Thread

Connection

DA2005-U2

 160  

1,5

  1,0*

 

 From -0,1 to 0,06; 0,15; 0,3; 0,9; 1,5; 2,4 MPa ІР40

IP53*

IP54*

 М20х1,5

Bottom

   Back*

*Special version

 On request, units of measurement can be ordered in kgs/cm²; bar, atm  

 The gauges can operate at temperature -50°C to + 60°C

Запись Manovacuum gauge UAM DA2005-U2 впервые появилась Pressure gauges UAM.

]]> Vacuum gauge UAM DV2005-U2 https://manometers.com.ua/en/produkciya/vacuum-gauge-uam-dv2005-u2/ Mon, 24 Jul 2023 03:12:39 +0000 https://manometers.com.ua/?post_type=product&p=18966 Pressure gauge DV2005-U2 is designed to measure the overpressure of non-crystallising liquids, steam, gas that are not aggressive to the materials of parts in contact with the measured medium and to provide an alarm (closing/opening of electrical circuits) when the set pressure limit is reached.
The measured environment must be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel devices is used - groups: ammonia, corrosion-resistant.
Pressure gauge DV2005-U2 is made of the following materials as standard: steel case, organic glass, brass alloy mechanism and fitting.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.

Download technical description ДВ2005-У2

Pressure gauge DV 2005-U2 is a complete analogue of pressure gauges of the following manufacturers:

  • ДВ 2005ф  "Фізтех"
  • ДВ 2005 Сг "Манотом"

Запись Vacuum gauge UAM DV2005-U2 впервые появилась Pressure gauges UAM.

]]> Case material: steel, stainless steel*

Measuring element material: copper alloy

Glass: organic

Current strength: no more than 1A

Voltage: 220-380V

Power: no more than 30W

 

Connection of external circuits

III- two opening contacts

IV- two closing contacts

V- two contacts: first is opening, second is closing
VI- two contacts: first is closing, second is opening

 Diameter size, mm Accuracy class Measuring range, MPa Degree of protection (IP) Thread

Connection

DV2005-U2

 160  

1,5

  1,0*

 

 From -0,1 to 0  MPa ІР40

IP53*

IP54*

 М20х1,5

Bottom

   Back*

*Special version

 On request, units of measurement can be ordered in kgs/cm²; bar, atm  

 The gauges can operate at temperature -50°C to + 60°C

 

Запись Vacuum gauge UAM DV2005-U2 впервые появилась Pressure gauges UAM.

]]>