Pressure gauge UAM DM2005-U2

1,517.76 1,734.88 

Pressure gauge DM2005-U2 is designed to measure the overpressure of non-crystallising liquids, steam, gas that are not aggressive to the materials of parts in contact with the measured medium and to provide an alarm (closing/opening of electrical circuits) when the set pressure limit is reached.
The measured environment must be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel devices is used – groups: ammonia, corrosion-resistant.
Pressure gauge DM2005-U2 is made of the following materials as standard: steel case, organic glass, brass alloy mechanism and fitting.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.

Description

Case material: steel, stainless steel*

Measuring element material: copper alloy

Glass: organic

Current strength: no more than 1A

Voltage: 220-380V

Power: no more than 30W

 

Connection of external circuits

III- two opening contacts

IV- two closing contacts

V- two contacts: first is opening, second is closing
VI- two contacts: first is closing, second is opening

Diameter size, mm Accuracy class Measuring range, MPa Degree of protection (IP) Thread

Connection

DM2010-U2

160  

1,5

  1,0*

 

From 0 to 0,06; 0,1; 0,16; 0,25; 0,4; 0,6; 1,0; 1,6; 2,5; 4; 6; 10; 16; 25; 40; 60;

100* 160* MPa

ІР40

IP53*

IP54*

М20х1,5

Bottom

   Back*

*Special version

 On request, units of measurement can be ordered in kgs/cm²; bar, atm  

 The gauges can operate at temperature -50°C to + 60°C

Additional information

Connection

Back (Axial), Bottom (Radial)

Diameter, mm

160

Case material

Steel

Degree of protection

IP40

Thread

M20x1,5

Measuring range, MPa

from 0 to 0.06, from 0 to 0.1, from 0 to 0.16, from 0 to 0.25, from 0 to 0.4, from 0 to 0.6, from 0 to 1.0, from 0 to 1.6, from 0 to 10, from 0 to 100, from 0 to 16, from 0 to 160, from 0 to 2.5, from 0 to 25, from 0 to 4, from 0 to 40, from 0 to 6, from 0 to 60

You may also like…