Manovacuum gauge UAM MVTI-U2
Ask the manager for the cost
Pressure gauge MVTI-U2 is designed to measure overpressure, non-crystallising liquids, steam, gas, oxygen, acetylene, refrigerants.
The measured environment should be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel instruments is used – groups: ammonia; corrosion-resistant.
The MVTI-U2 pressure gauge is made of the following materials in the standard version: steel body, technical glass, mechanism and fitting – brass alloy.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.
Description
Case material: aluminium alloy.
Measuring element material: stainless steel,bronze, brass.
Glass: technical.
|
Diameter size, mm |
Accuracy class | Measuring range, MPa | Degree of protection (IP) | Thread |
Connection |
|
|
MVTI-U2 |
160 | 0,4
0,6 1,0 |
From -0,1 tо 0,06; 0,15; 0,3; 0,9; 1,5; 2,4 MPа | IP40
IP54* IP65*
|
М20х1,5
G1/2* |
Bottom |
* Special version
On request, units of measurement can be ordered in kgs/cm²; bar, atm
The gauges can operate at temperature -50°C to + 60°C for accuracy class 0.6; 1.0
-30+50 °С for accuracy class 0.4
Maximum temperature of the measuring environment up to 150°C
Additional information
| Connection | Bottom (Radial) |
|---|---|
| Diameter, mm | 160 |
| Case material | Aluminium alloy |
| Thread | M20x1,5 |
| Degree of protection | IP40 |
| Measuring range, MPa | from -0.1 to 0.06, from -0.1 to 0.15, from -0.1 to 0.3, from -0.1 to 0.5, from -0.1 to 0.9, from -0.1 to 1.5, from -0.1 to 2.4 |
| Accuracy class | 0,4, 0,6, 1 |
