Manovacuum gauge UAM MVP3-U2
Pressure gauge MVP3-U2 is designed to measure overpressure of
non-crystallising liquids, steam, gas, oxygen, acetylene, refrigerants.
The measured environment must be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel devices is used – groups: ammonia, corrosion-resistant.
The MVP3-U2 pressure gauge is made of the following materials as standard: steel body, organic glass, brass alloy mechanism and fitting.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.
Description
Case material: steel
Measuring element material: copper alloy
Glass: organic
|
|
Diameter size, mm | Accuracy class | Measuring range | Degree of protection (IP) | Thread |
Connection |
|
MVP3-U2 |
100 | 1,5 | From -0.1 to 0,06; 0,15; 0,3; 0,9; 1,5; 2,4 MPa | ІР40
IP 53* IP 54* |
М20х1,5
G1/2 |
Bottom, Back |
* Special version
On request, units of measurement can be ordered in kgs/cm²; bar, atm
Pressure gauges can be supplied with a flange
The gauges can operate at temperature -50°C to + 60°C
Pressure gauges manufactured by UAM have a repairable mechanism and are a quality product.
The average service life of a pressure gauge is 12 years.
Each device is calibrated on reference equipment when it is released from production.
UAM is responsible for the quality of its products and provides not only warranty repairs but also post-warranty service.
UAM fulfils its obligations in terms of delivery dates as agreed.
Additional information
| Connection | Back (Axial), Bottom (Radial) |
|---|---|
| Diameter, mm | 100 |
| Case material | Steel |
| Thread | G1/2, M20x1,5 |
| Degree of protection | IP40, IP53 |
| Measuring range, MPa | from -0.1 to 0.06, from -0.1 to 0.15, from -0.1 to 0.3, from -0.1 to 0.5, from -0.1 to 0.9, from -0.1 to 1.5, from -0.1 to 2.4 |
