Manovacuum gauge UAM MVTI-U2

4,081.09 ₴ – 4,402.56 ₴

Ask the manager for the cost

Pressure gauge MVTI-U2 is designed to measure overpressure, non-crystallising liquids, steam, gas, oxygen, acetylene, refrigerants.
The measured environment should be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel instruments is used – groups: ammonia; corrosion-resistant.
The MVTI-U2 pressure gauge is made of the following materials in the standard version: steel body, technical glass, mechanism and fitting – brass alloy.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.

 

Description

Case material: aluminium alloy.

Measuring element material: stainless steel,bronze, brass.

Glass: technical.

Diameter size, mm

 Accuracy class Measuring range, MPa Degree of protection (IP) Thread

Connection

MVTI-U2

 160 0,4

0,6

1,0

 From -0,1 tо 0,06; 0,15; 0,3; 0,9; 1,5; 2,4 MPа IP40

IP54*

IP65*

 

 М20х1,5

G1/2*

Bottom

  * Special version

On request, units of measurement can be ordered in kgs/cm²; bar, atm

The gauges can operate at temperature -50°C to + 60°C for accuracy class 0.6; 1.0

-30+50 °С for accuracy class 0.4

Maximum temperature of the measuring environment up to 150°C

Additional information

Connection

Bottom (Radial)
Diameter, mm

160
Case material

Aluminium alloy
Thread

M20x1,5
Degree of protection

IP40
Measuring range, MPa

from -0.1 to 0.06, from -0.1 to 0.15, from -0.1 to 0.3, from -0.1 to 0.5, from -0.1 to 0.9, from -0.1 to 1.5, from -0.1 to 2.4
Accuracy class

0,4, 0,6, 1

You may also like…

Related products