Vacuum gauge UAM VP2-U2
Pressure gauge VP2-U2 is designed to measure overpressure of
non-crystallising liquids, steam, gas, oxygen, acetylene, refrigerants.
The measured environment must be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel devices is used – groups: ammonia, corrosion-resistant.
The VP2-U2 pressure gauge is made of the following materials as standard: steel body, organic glass, brass alloy mechanism and fitting.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.
Description
Case material: steel
Measuring element material: copper alloy
Glass: organic
|
|
Diameter size, mm | Accuracy class | Measuring range | Degree of protection (IP) | Thread |
Connection |
|
VP2-U2 |
50
63 |
2,5 | From -0.1 to 0 MPa | ІР40 | М12х1,5
G1/4 |
Bottom, Back |
On request, units of measurement can be ordered in kgs/cm²; bar, atm
Pressure gauges can be supplied with a flange
The gauges can operate at temperature -50°C to + 60°C
Additional information
| Case material | Steel |
|---|---|
| Diameter, mm | 50, 63 |
| Degree of protection | IP40 |
| Connection | Back (Axial), Bottom (Radial) |
| Thread | G1/4, М12х1,5 |
| Measuring range, MPa | from -0.1 to 0 |
