Pressure gauge UAM MP3А-U2
Pressure gauge MP3А-U2 is designed to measure the overpressure of liquid, gaseous and aqueous ammonia solutions.
Pressure gauge MP3А-U2 is designed for aggressive environments. In this series of instruments, the mechanisms that come into contact with the measured medium are made of stainless steel.
Pressure gauge MP3A-U2 is made of the following materials as standard: steel body, technical glass, mechanism and fitting – stainless steel.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.
Description
Case material: Steel
Measuring element material: Stainless steel
Glass: Organic
|
Diameter size, mm | Accuracy class | Measuring range | Degree of protection (IP) | Thread |
Connection |
МП3-У2 |
100 | 1,5
1,0* |
From 0 to 0,06; 0,1; 0,16; 0,25; 0,4; 0,6; 1,0; 1,6; 2,5; 4; 6; 10; 16; 25; 40; 60; 100; 160 MPa | ІР40
IP 53* IP 54* |
М20х1,5
G1/2 |
Bottom, Back |
* Special version
On request, units of measurement can be ordered in kgs/cm²; bar, atm
The gauges can operate at temperature -50°C to + 60°C
Maximum temperature of the measuring environment up to 150°C
Additional information
Connection | Back (Axial), Bottom (Radial) |
---|---|
Diameter, mm | 100 |
Case material | Steel |
Thread | G1/2, M20x1,5 |
Degree of protection | IP40, IP53, IP54 |
Measuring range, MPa | from 0 to 0.06, from 0 to 0.1, from 0 to 0.16, from 0 to 0.25, from 0 to 0.4, from 0 to 0.6, from 0 to 1.0, from 0 to 1.6, from 0 to 10, from 0 to 100, from 0 to 16, from 0 to 160, from 0 to 2.5, from 0 to 25, from 0 to 4, from 0 to 40, from 0 to 6, from 0 to 60 |