Pressure gauge DM 8008-V-U2-Ks i1
These pressure gauges are designed to measure the overpressure of hydrocarbon gas, water-gas-oil emulsion, which includes carbon dioxide and hydrogen sulfide up to 25% of both substances, paraffin and inorganic salts up to 10% of the weight.
Pressure gauges of this type are used in conditions of high vibration. The device can compensate for the vibrating environment due to its special design. Resistance to vibration is achieved thanks to a vibration-absorbing substance
Description
Case material: stainless steel
Measuring element material: stainless steel
Glass: organic (safe multilayer)
|
Diameter size, mm |
Accuracy class | Measuring range, MPa | Degree of protection (IP) | Thread |
Connection |
|
|
DM 8008-V-U2-Ks i1 |
40*
50* 63 |
1,5
1,0* |
From 0 tо 0,06; 0,1; 0,16; 0,25; 0,4; 0,6; 1,0; 1,6; 2,5; 4; 6; 10; 16; 25; 40; 60;100;160 MPа | IP54
IP65* |
М12х1,5
G1/4 |
Bottom Back |
* Special version
On request, units of measurement can be ordered in kgs/cm²; bar, atm
The gauges can operate at temperature -50°C to + 60°C
Maximum temperature of the measuring environment up to 200°C
Additional information
| Connection | Back (Axial), Bottom (Radial) |
|---|---|
| Diameter, mm | 40, 50, 63 |
| Case material | Stainless steel |
| Measuring range, MPa | from 0 to 0.06, from 0 to 0.1, from 0 to 0.16, from 0 to 0.25, from 0 to 0.4, from 0 to 0.6, from 0 to 1.0, from 0 to 1.6, from 0 to 10, from 0 to 100, from 0 to 16, from 0 to 160, from 0 to 2.5, from 0 to 25, from 0 to 4, from 0 to 40, from 0 to 6, from 0 to 60 |
| Thread | G1/2, M20x1,5 |
| Degree of protection | IP54, IP65 |
