Manovacuum gauge UAM MVP4А-U2
Pressure gauge MVP4А-U2 is designed to measure the overpressure of liquid, gaseous and aqueous ammonia solutions.
Pressure gauge MVP4А-U2 is designed for aggressive environments. In this series of instruments, the mechanisms that come into contact with the measured medium are made of stainless steel.
Pressure gauge MVP4A-U2 is made of the following materials as standard: steel body, technical glass, mechanism and fitting – stainless steel.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.
Description
Case material: Steel
Measuring element material: Stainless steel
Glass: Technical
|
|
Diameter size, mm | Accuracy class | Measuring range | Degree of protection (IP) | Thread |
Connection |
|
MVP4A-U2 |
160 | 1,5
1,0* |
From -0,1 tо 0,06; 0,15; 0,3; 0,9; 1,5; 2,4 MPa | ІР40
IP 53* IP 54* |
М20х1,5
G1/2 |
Bottom, Back |
* Special version
On request, units of measurement can be ordered in kgs/cm²; bar, atm
The gauges can operate at temperature -50°C to + 60°C
Maximum temperature of the measuring environment up to 150°C
Additional information
| Connection | Back (Axial), Bottom (Radial) |
|---|---|
| Diameter, mm | 160 |
| Case material | Steel |
| Thread | G1/2, M20x1,5 |
| Degree of protection | IP40, IP53, IP54 |
| Measuring range, MPa | from -0.1 to 0.06, from -0.1 to 0.15, from -0.1 to 0.3, from -0.1 to 0.5, from -0.1 to 0.9, from -0.1 to 1.5, from -0.1 to 2.4 |
