Manovacuum gauge UAM DA8008-V-U2 i2
Vibration-resistant pressure gauge DA8008-V-U2 i2 is designed to measure the overpressure of non-crystallising liquids, steam, gas, including oxygen, refrigerant.
The measured environment should be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel instruments is used – groups: ammonia; corrosion-resistant.
Pressure gauge DA8008-V-U2 i2 in the standard version is made of the following materials: stainless steel body, organic glass, mechanism and fitting – brass alloy.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.
Description
Case material: stainless steel.
Measuring element material: brass, bronze, stainless steel.
Glass: organic (safe multilayer).
|
Diameter size, mm |
Accuracy class | Measuring range, MPa | Degree of protection (IP) | Thread |
Connection |
|
|
DA8008-V-U2 i2 |
160 | 1,5
1,0* |
From -0,1 tо 0,06; 0,15; 0,3; 0,9; 1,5; 2,4 MPа | IP54
IP65* |
М20х1,5
G1/2* |
Bottom Back |
* Special version
On request, units of measurement can be ordered in kgs/cm²; bar, atm
The gauges can operate at temperature -50°C to + 60°C
Maximum temperature of the measuring environment up to 150°C
Additional information
| Connection | Back (Axial), Bottom (Radial) |
|---|---|
| Diameter, mm | 160 |
| Case material | Stainless steel |
| Measuring range, MPa | from -0.1 to 0.06, from -0.1 to 0.15, from -0.1 to 0.3, from -0.1 to 0.5, from -0.1 to 0.9, from -0.1 to 1.5, from -0.1 to 2.4 |
| Degree of protection | IP54, IP65 |
| Thread | G1/2, M20x1,5 |
