Manovacuum gauge MVP3А-U2-Ks
The MVP3A-U2-Ks pressure gauge is designed to measure the overpressure of hydrocarbon gas, water-gas-oil emulsion with hydrogen sulphide and carbon dioxide content up to 25% by volume, inorganic salts and paraffin up to 10% by weight.
The device parts that come into contact with the measured medium are made of corrosion-resistant alloys.
The MVP3A-U2-Ks pressure gauge is made of the following materials as standard: stainless steel body, technical glass, mechanism and fitting – stainless steel.
The sensitive element of the device is a Bourdon tube. It reacts to pressure changes.
Description
Case material: stainless steel
Measuring element material: stainless steel
Glass: Organic
|
|
Diameter size, mm | Accuracy class | Measuring range, MPa | Degree of protection (IP) | Thread | Connection |
| MVP3А-U2-Ks | 100 | 1,5
1,0* |
From 0,1 tо 0,06; 0,15; 0,3; 0,9; 1,5; 2,4 MPa | IP54
IP65* |
М20х1,5
G1/2 |
Bottom, Back |
* Special version
On request, units of measurement can be ordered in kgs/cm²; bar, atm
The gauges can operate at temperature -50°C to + 60°C
Maximum temperature of the measuring environment up to 150°C
Additional information
| Connection | Back (Axial), Bottom (Radial) |
|---|---|
| Diameter, mm | 100 |
| Case material | Stainless steel |
| Thread | G1/2, M20x1,5 |
| Degree of protection | IP54, IP65 |
| Measuring range, MPa | from -0.1 to 0.06, from -0.1 to 0.15, from -0.1 to 0.3, from -0.1 to 0.5, from -0.1 to 0.9, from -0.1 to 1.5, from -0.1 to 2.4 |
