Pressure gauge UAM MP4А-U2-Ks
The MP4A-U2-Ks pressure gauge is designed to measure the overpressure of hydrocarbon gas, water-gas-oil emulsion with hydrogen sulphide and carbon dioxide content up to 25% by volume, inorganic salts and paraffin up to 10% by weight.
The device parts that come into contact with the measured medium are made of corrosion-resistant alloys.
The MP4A-U2-Ks pressure gauge is made of the following materials as standard: stainless steel body, technical glass, mechanism and fitting – stainless steel.
The sensitive element of the device is a Bourdon tube. It reacts to pressure changes.
Description
Case material: stainless steel
Measuring element material: stainless steel
Glass: Organic
|
|
Diameter size, mm | Accuracy class | Measuring range, MPa | Degree of protection (IP) | Thread | Connection |
| MP4А-U2-Ks | 160 | 1,5
1,0* |
From 0 to 0,06; 0,1; 0,16; 0,25; 0,4; 0,6; 1,0; 1,6; 2,5; 4; 6; 10; 16; 25; 40; 60;100;160 МПа | IP54
IP65* |
М20х1,5
G1/2 |
Bottom, Back |
* Special version
On request, units of measurement can be ordered in kgs/cm²; bar, atm
The gauges can operate at temperature -50°C to + 60°C
Maximum temperature of the measuring environment up to 150°C
Additional information
| Connection | Back (Axial), Bottom (Radial) |
|---|---|
| Diameter, mm | 160 |
| Thread | G1/2, M20x1,5 |
| Degree of protection | IP54, IP65 |
| Case material | Stainless steel |
| Measuring range, MPa | from 0 to 0.06, from 0 to 0.1, from 0 to 0.16, from 0 to 0.25, from 0 to 0.4, from 0 to 0.6, from 0 to 1.0, from 0 to 1.6, from 0 to 10, from 0 to 100, from 0 to 16, from 0 to 160, from 0 to 2.5, from 0 to 25, from 0 to 4, from 0 to 40, from 0 to 6, from 0 to 60 |
