Pressure gauge UAM DM8008-V-U2 i1

369.95 464.40 

Vibration-resistant pressure gauge DM8008-V-U2 i1 is designed to measure the overpressure of non-crystallising liquids, steam, gas, including oxygen, refrigerant.
The measured environment should be non-aggressive towards copper alloys.
For aggressive environments, a series of stainless steel instruments is used – groups: ammonia; corrosion-resistant.
Pressure gauge DM8008-V-U2  i1 in the standard version is made of the following materials: stainless steel body, organic glass, mechanism and fitting – brass alloy.
The sensitive element of the device is a Bourdon tube. It responds to changes in pressure.

Description

Case material: stainless steel.

Measuring element material: brass, bronze, stainless steel.

Glass: organic (safe multilayer).

Diameter size, mm

Accuracy class Measuring range, MPa Degree of protection (IP) Thread

Connection

DM8008-V-U2 i1

40

50

63

1,5

1,0*

From 0 tо  0,06; 0,1; 0,16; 0,25; 0,4; 0,6; 1,0; 1,6; 2,5; 4; 6; 10; 16; 25; 40; 60;100;160 MPа IP54

IP65*

М12х1,5

G1/4

Bottom

Back

  * Special version

On request, units of measurement can be ordered in kgs/cm²; bar, atm

The gauges can operate at temperature -50°C to + 60°C

Maximum temperature of the measuring environment up to 150°C

 

Additional information

Connection

Back (Axial), Bottom (Radial)

Diameter, mm

40, 50, 63

Case material

Stainless steel

Measuring range, MPa

from 0 to 0.06, from 0 to 0.1, from 0 to 0.16, from 0 to 0.25, from 0 to 0.4, from 0 to 0.6, from 0 to 1.0, from 0 to 1.6, from 0 to 10, from 0 to 100, from 0 to 16, from 0 to 2.5, from 0 to 25, from 0 to 4, from 0 to 40, from 0 to 6, from 0 to 60

Degree of protection

IP54, IP65

Thread

G1/4, М12х1,5

You may also like…